LOADING THE BRITISH LEE ENFIELD RIFLE
STRIPPER CLIP INSTRUCTIONS
When Loading the Enfield Stripper clip - Stagger the rounds of ammo,
have the Rims of the rounds 2 & 4 overlap the Rims of rounds 1,3 & 5
Loading & Using the Enfield Stripper Clip
Turn bolt handle up as far as it will go and pull straight back to the limit of travel.
Insert a loaded stripper clip into the clip guide in the receiver and strip / push the cartridges down into the magazine.
Remove the empty clip.
Insert a second clip, push these cartridges down and remove clip, This will leave the magazine fully charged/loaded with 10 cartridges.
Then push the bolt handle fully forward and down and that loads the firing chamber, cocks and locks ready for firing with a pull of the trigger.
Unless the weapon is to be fired immediately, pull the thumb rocker on the left rear of the receiver to "Safe."
We hope you found this information helpful
Copyright © 1999-2010 NoveltyGuns
)
